CALL US
+86 591 83605791
CONTACT US
sales@tempotec.com
Waveplates

True Zero-Order Waveplate

Cemented True Zero-Order Waveplate                     


The true zero-order waveplate means that the thickness of waveplate is very thin (less than 0.1mm) which make the true zero-order waveplate excellent in temperature, wavelength and incident angle (about 20º) bandwidth. Therefore, it is excellent choice for the highly accurate application. It is cemented with a block of glass which is limited to low and medium power application.                            


Specifications:                           
Material: Crystal Quartz                 
Dimension Tolerance: +0.0, -0.2 mm     
Wavefront Distortion: < λ/8 @ 632.8 nm        
Retardation: λ/8, λ/4, λ/2 or λ (typical)             
Retardation Tolerance: < λ/200 (typical)              
Wavelength Range: 400-2100 nm             
Parallelism: <1 arc second             
Surface Quality: 20-10 scratch and dig              


Single Plate True Zero-Order Waveplate             

In order to enable the waveplate suitible for high damage threshold (more than 1GW/cm2) application: Tempotec provides a single plate of true zero-order waveplate. The thickness of this waveplate means handling can be difficult, we can provide mounts upon request.           


Specifications:            
Material: Crystal Quartz          
Dimension Tolerance: +0.0, -0.2 mm        
Wavefront Distortion: <λ/8 @ 632.8 nm        
Retardation: λ/8, λ/4, λ/2 or  λ (typical)    
Retardation Tolerance: <λ/500 (typical)          

Wavelength Range: 400-2100 nm              
Parallelism: <1 arc second          
Surface Quality: 20-10 scratch and dig         


AR/AR Coating R<0.2% per face is available upon request.         
Other retardations are also available.             


【CLOSE】PREV: Zero-Order Waveplate
NEXT:No information
Copyright © Tempotec Optics Co., Ltd. All rights reserved.      闽ICP备17018488号-1      Privacy Policy